Community R.5-MAX Operations Instructions download pdf (Page 3)

R.5-MAX, R2-MAX Page 3 Installation and Operation Manual

UNPACKING AND INSPECTION

Community R SERIES loudspeakers are engineered and

manufactured to be rugged and they are carefully packed

in sturdy cartons. Make sure that the number of cartons

shown on the freight documents have actually been

delivered. It is wise to thoroughly inspect each unit after

it has been removed from the packaging, as damage could

occur during shipping.

Please note that once the shipment has left your dealer

or the Community factory, the responsibility for damage

is always borne by the freight company. If damage has

occurred during shipping, you must ﬁle a claim directly

with the freight company. It’s very important to contact

the freight company as soon as possible after receiving

your shipment, as most freight companies have a short

time limit within which they will investigate claims. Be

sure to save the carton and the packing material, as most

claims will be denied if these materials are not retained.

Your Community dealer and the factory will try to help in

any way they can, but it is the responsibility of the party

receiving the shipment to ﬁle the damage claim.

It is always a good idea to retain the carton and packing

materials indeﬁnitely, if possible, in the event that the unit

may need to be returned to your dealer or distributor for

repair.

IN THE CARTON

Each shipping carton contains the following items:

• One (1) R SERIES loudspeaker

• One (1) Steel mounting yoke (pre-installed)

• Multi-angle aiming strap [R.5-MAX (1), R2-MAX (2)]

• One (1) Installation and operation manual

• One (1) Warranty card

• Mounting hardware:

R.5-MAX (all models): 3/8" x 1-1/4" threaded studs

(x3), 3/8" lock washers (x3), 3/8" ﬂat washers (x3),

and 3/8"-16 hex nuts (x3). All hardware is stainless

steel.

R2-MAX (all models): 1/2" hex bolts (2" x3, 1-1/4" x3),

1/2" lock washers (x6), 1/2" ﬂat washers (x7),

1/2" hex nut (x1), and 2" OD rubber gaskets (x5). All

hardware is stainless steel. Much of the hardware

may be preinstalled on the enclosure.

SYSTEM INFORMATION

PHYSICAL FEATURES / GENERAL DESCRIPTION

The R.5-MAX and R2-MAX are the premier products in the

R SERIES line. They are designed for premium quality music

reproduction with very low distortion and high output.

The R.5-MAX: This fully passive, true point source

loudspeaker produces a very ﬂat frequency response

without external equalization. It features a 600W

neodymium LF driver with aluminum demodulation ring

and a large format 1.4" exit HF driver with copper shorting

ring and hybrid resonance damping diaphragm. It is ideal

for critical music reproduction in challenging acoustic

environment applications indoors or outdoors. Two horn

patterns are available: 60° x 60° and 90° x 60°.

The R2-MAX delivers the same great pattern control and

vocal intelligibility as a standard R2, but with the addition

of premium drivers, a signal aligned MF/HF horn, very ﬂat

frequency response, higher broadband output, and lower

distortion. The R2-MAX features dual 12" 600W neodymium

LF drivers with aluminum demodulation rings, large

format 1.4" exit HF drivers with copper shorting rings and

hybrid, resonance damping diaphragms, and higher output

M200HP midrange compression drivers. It is ideal for critical

music reproduction in dicult acoustic environments. The

R2-MAX is a modern stadium loudspeaker, designed to

meet the needs of today’s modern sporting venues. Output

is biamp only. Three coverage patterns are available:

60° x 40°, 60° x 60° and 90° x 40°.

R SERIES FEATURES / TECHNOLOGY

R-MAX loudspeakers oer numerous features and

technologies that provide unprecedented sonic quality and

installation ﬂexibility. Some of these include:

• Unique full-range high output loudspeakers with

advanced passive crossover technology

• All models are weather-resistant, UV stabilized and

suitable for outdoor direct exposure

• Protective steel grilles and mounting brackets are

covered with a rugged, zinc-rich epoxy dual-layer

powder-coat ﬁnish for superior resistance to weather

• Stainless steel hardware

• R.5-MAX models are available in black, white, or light

grey ﬁnish and R2-MAX models are available in a

light grey ﬁnish (standard). Custom colors are also

available.

1 2 3 4 5 6 7 8 ... 19 20

Comments to this Manuals

No comments

Community R.5-MAX Operations Instructions Page 3

Comments to this Manuals

Related products and manuals for Soundbar speakers Community R.5-MAX